Search

-xray inspection (2)
assembly (1)
Batch reflow oven (1)
Brochure (1)
cleaning (1)
Cleaning & Coating (1)
Coating (2)
coating removal (2)
inspection (3)
Other equipment (1)
Pick & Place Automatic (1)
Pick & Place manual (1)
Plasma Technics (4)
Plasma techniques (3)
Reflow ovens (3)
Rework Stations (2)
Screenprinters (3)
Screenprinting (1)
Selective Solder Wave (2)
services (2)
Solder Wave (5)
Solderwave Mini Wave (3)
Table top reflow oven (1)
Technology (3)
Vapor Phase (4)
VOIDS (1)
Washing Machines / In-Line / Spray (1)
Wave solder balls (1)
X-Ray AOI (1)

WP-Cumulus by Roy Tanck and Luke Morton requires Flash Player 9 or better.

Solbot

Standard equipments

•Inlet Chain Conveyor

•Hot Air Pre-heater

•Double Wave

•Casting Iron Solder Pot

•Outlet Conveyor

•Finger Conveyor

•Control System

•Finger Cleaner Optional equipments

•Rapid Cooling System

•Center Bar for Solder Pot

•Touch Panel & PLC Control System •V/L type Titanium Finger

Solbot solder wave machine

Fix Trade is suplier for Solbot solder wave machines. We provide installation, service and after sales for the EU.

C250 Series wave solder machine is available with dual waves for mixed technology (through-hole + SMT) processing or with a single wave for through-hole only. Stand is included. It has everything you need to get started with lead-free solders: high-temp finger conveyor, foam fluxer, 16.5″ of preheating power, high-temp solder pot, built-in controls, and stand.

An upgrade to spray fluxer and touch-screen computer control is also available.

 
 

 

Finger conveyor eliminates the expense and time cost of using pallets and will not wear out from the high temperatures required for lead-free solders. Heating coils and cast, high-temperature solder pot also visible.

 

A rear panel drops open, allowing the supporting legs, shown folded for storage (L), to deploy, allowing the panel to open for convenient and easy access to the high-temperature cast solder pot.  

 


The upgraded model of the 250C includes a spray flux unit (shown here with its vent) in addition to the foam fluxer, and a PC with touch-screen controls.

 


The upgraded 250C, with door open, showing the optional touch-screen computer controller (right). Below the touch-screen are the conveyor speed adjuster and the solder pot wave adjuster.

 


Turning the removable handle (L) manually controls the position of the solder pot once the rear door is opened, allowing easy access for cleaning and maintenance.

 


The finger conveyor (R, inlet with the adjust handle below), accepts differing board widths. It can be easily raised or lowered by means of the manual wheel under the rail (L) at the other end.


Solder wave EWS 310

Economic wave soldering machine with finger conveyor for boards up to 11.8″ (310mm).  Self-contained fluxing, preheating, and laminar (smooth) solder wave modules.  Optional turbulent (SMT passive) solder wave module available.

 

Get A Quote      View Literature      Request Manual      Add To Product Inquiry Cart

Wave Width: 11.8″ (310mm)
Max Wave Height: 0 to 3/8″ (0 to 10mm)
Solder Pot Capacity: 200 lbs. (90kgs)
Solder Pot Power: 3.6 kW
Max Conveyor Speed: 98.4″/min (2.5m/min)
Foam Fluxer Tank: 0.8 gal. (3 liters)
Compressed Air: max 30 psi on system with air knife
Approx Warm-up Time: 60 minutes
Max Preheat 1 Temp: 302°F (150°C)
Preheat 1 Power: 4.8 kW
Max Preheat 2 Temp: 392°F (200°C)
Preheat 2 Power: 2.0 kW
Preheat 3 Power: N/A

Automated Selective Soldering Machine – KISS 103

PCB Panel Size Minimum Maximum 2” x 2” 18” x 24” (18” x 42” with manual step over) Safe “Keep Away” (distance to adjacent pads) 1mm
Motion Z-Axis Accuracy/Repeatability +/-.002″ Speed 0-40 inches/min X and Y Axis Accuracy/Repeatability +/-.002″ Speed 0-250 inches/min
Solder Pot: Temperature PID proportioning (0-400°C) ± 2°C Solder Capacity 30 lbs. Pump PC controlled
Controls : PC with Windows XP O.S. Physical Dimensions:  54″ wide x 40″ deep x 52″ high Weight 575 lbs.
Facilities : Power 120VAC/1 Ph/60 Hz 15 amps Nitrogen 15-50 CFH @ 60-70 PSI

Spartan 8″ and 12″ (Double) Wave Soldering Machines

S8D-Stand

Automatic wave solder system with self-contained fluxing, preheating and laminar (smooth) solder wave modules.

  • Automatic wave solder system
  • Best value through cutting-edge technology
  • Ready-to-go fluxing, preheating and wave modules
  • Quick ROI (Return on Investment)
  • Exceptional accuracy and repeatability
  • Lead or Lead-Free solder compatibility
  • Easy to use
  • Low maintenance
  • Single (8S) and dual (8D) wave capability

Wave Width: 8″ (203mm)
Max Wave Height: 0-3/8″/0-10mm
Solder Pot Capacity: 125 lbs (57 kgs)
Solder Pot Power: 2.5 kw
Max Conveyor Speed: 6 ft/min (2m/min)
Foam Fluxer Tank: 0.5 gal (2 litres)
Compressed Air: Max 30 psi on system with air-knife only
Approx Warm-up Time: 40 min.
Max Preheat 1 Temp: 338°F (170°C)
Preheat 1 Power: 2.25 kw
Max Preheat 2 Temp: 428°F (220°C)
Preheat 2 Power: 1.5 kw
Preheat 3 Power: N/A