The professional units for dosing of glues, solder pastes as well as low viscosity products.
The dispensers CMS 350 DOTTY and CMS 450.V2 DOTTY can work autonomous or in combination with a pick & place unit.
The CMS 450.V2 DOTTY model can be connected to our 3 axes TECHNODRILL machine to make a automatic 3 axes dispenser assisted by computer.
DOTTY dispensers key features:

• Facility of use 

• Different functioning uses

• Light

• Best quality/price ratio for performance without equal

• Compacts & ergonomic

• 10 programmes (CMS 450.V2 DOTTY only)

The DOTTY dispensers can work under many different ways :

- Manual: pushing on the pedal, the product deposit will be done when the control is done. Getting of the pedal will stop the deposit

- Semi-automatic: pushing on the pedal, a x quantity of deposit is done once. You need to push again on the pedal to start a new deposit.

- Automatic: remaining on the pedal, a x quantity deposit is done every x repetitions until the pedal is getting of.

- Learning (for CMS 450.V2 DOTTY model only): This programm automatically defines deposit and repetition times according to work to do. You just need to make 10 manual deposits depending on the requested rate and the unit will analyse, making an average of appropriate times. Once learning mode is finished, the unit will get back to automatic mode.

The dispensers are delivered complete wit a set of needles, a set of suction cups, a 10cc syringe, a foot  pedal control.
To be connected to a compressed air network or on a compressor.

The reflow oven FT05 is a new generation professional oven. It was created to work with the new high temperature alloys, including lead free alloys in force o the 1st of July 2006.

For a best precision, the heat is distributed by forced convection.The reflow oven FT05 includes in line the memorisation of 10 programmes, the advice visualisation by LCD display and 5 connections in front face: 3 for flexible thermocouples, 1 for printer and 1 for computer. The FT05 oven is compatible with the software SMTix® (as an option). In « Test » mode: this software parameters the oven to test profiles on boards, to view the curve tracing, to valid the tests and to store in one of the 10 memories of the oven or computer. In « Manufacturing » mode: piloting of the oven from validate and memorised tests. View of the oven probe and curve tracing.

FT05 Key features:
• Complete view of the card through a large window
• Compact model but offering a reflow working area of 350 x 400 mm
• Display on LCD screen of the different advice
• Memorisation of 10 programmes in line
• Compatible for high temperature alloys, above all lead free
• Heat through forced convection.
• Temperature control by microprocessor.
• Compatible with SMTix® software
• Very easy programmation for a simple use

Safety: double window with air circulation, locking of the access door, extraction pipe for solder fumes, filtration unit for solder fumes as an option.

more…

Higher throughput reflow oven with 20″ (508mm) wide conveyor for production runs.  The 2000HC/HT reflow oven utilizes our patented Horizontal Convection Heating technology for extremely uniform temperature profiling across the board for enhanced process control.  The unit is available with maximum heating temperature of 250°C (482°F) for lead solder or 400°C (752°F) for lead-free solder operation.

• 6 vertical heating zones plus cooling zone.
• Low mass 20″ (508mm) wide stainless steel conveyor
• Status light tower included
• Easy lift clamshell hood design with gas strut assist
• Edge rail conveyor option available
• Real time graphic temperature profiler to assist in profiling of board
• PC interface software optionally available
• Nitrogen gas inerting option available
• Reflow oven available in Lead (HC version) and Lead-free (HT version) capable