The professional units for dosing of glues, solder pastes as well as low viscosity products.
The dispensers CMS 350 DOTTY and CMS 450.V2 DOTTY can work autonomous or in combination with a pick & place unit.
The CMS 450.V2 DOTTY model can be connected to our 3 axes TECHNODRILL machine to make a automatic 3 axes dispenser assisted by computer.
DOTTY dispensers key features:
• Facility of use
• Different functioning uses
• Best quality/price ratio for performance without equal
• Compacts & ergonomic
• 10 programmes (CMS 450.V2 DOTTY only)
The DOTTY dispensers can work under many different ways :
- Manual: pushing on the pedal, the product deposit will be done when the control is done. Getting of the pedal will stop the deposit
- Semi-automatic: pushing on the pedal, a x quantity of deposit is done once. You need to push again on the pedal to start a new deposit.
- Automatic: remaining on the pedal, a x quantity deposit is done every x repetitions until the pedal is getting of.
- Learning (for CMS 450.V2 DOTTY model only): This programm automatically defines deposit and repetition times according to work to do. You just need to make 10 manual deposits depending on the requested rate and the unit will analyse, making an average of appropriate times. Once learning mode is finished, the unit will get back to automatic mode.
|CMS 350 DOTTY Dispenser||F41 014|
|CMS 450.V2 DOTTY Dispenser||F41 020.1|
The dispensers are delivered complete wit a set of needles, a set of suction cups, a 10cc syringe, a foot pedal control.
To be connected to a compressed air network or on a compressor.
|Technical characteristics||CMS 350 DOTTY||CMS 450.V2 DOTTY|
|Available use modes||3||5|
|Max. pressure||7 bars max.||7 bars max.|
|Power||15 W||14 W|
|Sound level||< 40 dB (A)||< 40 dB (A)|
|Using pressure||0.1 to 7 bars||0.1 to 7 bars|
|External dim. L x l x H (mm)||177 x 10 x 120||260 x 140 x 140|
|Net weight||1,8 Kg||2,0 Kg|
|Power supply||230 V- 50/60 Hz||230 V- 50/60 Hz|