Rework Station is the system that it is for soldering and de-soldering to the unit parts on the board. The unit parts will be very small area on the board normally,Therefore, the board will be heated in a only small area. In this case, the board may warp with heat and adjoining parts may receive a damage with heat.
The Rework Station must be managed of reworking with safety and exactly under that situation. Furthermore, the system operation should be easy and safety to the operator. Our rework Station will be best matching to the needs.
History of the Rework Station.
We ware already have a rework system in 1980 to the board for through hole. And the rework system of model HG for SMD was developed in 1990. The rework system for BGA was developed 1998, It is model MS series. Furthermore,we developed of the rework system for 0402(EIA 01005), 0402 of the chip size component in 2005. We always lead a market needs and offer the newest rework system
Feature of the rework system MS series.
The rework system have to heat a very narrow area on the board. MS series rework system can be it exactly and easy. It is with very advanced technical know-how. Also as for the newest high density board, the parts of a fine lead pitch and chip size parts, it is possible for reworking correctly. Furthermore, MS series can complete all the processes of reworking, if it uses with the Jig. They are heating, removal, cleaning, printing. positioning, mounting, re-balling etc. and it is even inspection.
MS9000SAN is the all-round rework system. Almost all SMD can be reworked. The original ITTS auto profiler system operates the system easily and exactly.
All possibilities are connector, sockets, shield covers, SMD ; BGA and CSP, QFP fine pitch 0.3 or less.
The machine features the following:
- Automatic Thermal Profile System
- ITTS(Intelligence Thermal Trace System)
- High performance combination heating system
- Powerful 6 zones heating system
- Standard split screen zoom for easy alignment of large components
- User Friendly touch screen operation System
- For global use, it can change to four languages. (English/Japanese/China/Korea)
- Built-in 3+1 CH Temperature profile monitor
- Optimal for Lead Free Solder
Automatic Thermal Profile System
ITTS(Intelligent Thermal-Trace System) is provide of the optimal temperature profile operation, if the temperature data of the profile which you expect is inputted.
The ten key for data input screen is bringing up, if the window to input is touched. And ITTS will be provided automatically of the optimal temperature profile operation.
ITTS automatic operation is controlled by the sensor at “CA” . Tthe automatic control of the ITTS is operated that the temperature of “CA” may become the same as the temperature of the solder ball “S”.
In MS9000SAN, there are the screen for administrators and the screen for workers. For safety, the screen for administrator is managed with the password. And only operation keys are shown in the operator’s screen. By those keys, can not never change and input, of the data.
Furthermore, the machine has many interlock screens, The picture is some example screen. They will be also protect an operator’s safety.
The screen display can be choose by the basic setup of the system. All screens are displayed in the selected language.
Built-in 3+1 CH Temperature profile monitor
|Profile Monitor Screen has two kinds of the displays, one is for graph data and other one is for the analyzed data. they can changed and checked on the screen.
Measurement of temperature is possible at 4CH.
Data analysis is peak temperature for each CH, and the time interval for each CH at the temperature specified in before. It can be check at the 2 points.
When it should not be completed witd ITTS. ( In for example, the case of special parts etc.)
ITTS data can be transmitted to S mode operation screen of 6+1 zones. the temperature profile is finely correctable on S mode screen.
The profile data can be sending to the PC. It is transmitted in the SVC mode data of the Excel. The data sample showed And the data is printed out from the PC as “the data sample”.
The data sample is shown as:
CH-1 Surface on the PKG.
CH-2 Under the board.
CH-4 At the solder ball.
ITTS is automatically operated so that the temperature of the solder ball and the temperature on the surface of the PKG may almost be set to zero.